Specifications RS1
|
Characteristics |
- |
|
Residue on 600 micron IS Sieve, percent by mass, Max |
0.05 |
|
Viscosity by saybolt furol viscometer, seconds 1) At 25℃ 2) At 50℃ |
- 20-100 |
|
Coagulation of emulsion at low temperature1) |
Nil |
|
Storage stability after 24 h, percent, Max |
2 |
|
Particle charge |
Positive |
|
Coating ability and water resistance: 1) Coating, dry aggregate 2) Coating, after spraying 3) Coating, wet aggregate 4) Coating, after spraying |
- |
|
Stability to mixing with cement (% coagulation), Max |
- |
|
Miscibility with water |
No Coagulation |
|
Tests on residue: 1) Residue by evaporation, percent, Min 2) Penetration 25℃/100g/5 sec 3) Ductility 27℃/cm, Min 4) Solubility I tricholoethylne, percent by mass, Min |
60 80-150 50 98 |
|
Distillation in percent volume of distillate recovered at 360℃ at 1) 190℃ 2) 225℃ 3) 260℃ 4) 316℃ 5) Residue at 360℃, percent, Min |
- |
|
Water content, percent by mass, Max |
- |
1) This requirement shall be applicable only under situations where the ambient temperature is below 15℃.
2) The value of solubility is determined on distillation residue at 360℃.
Medium setting: Emulsion Break is slower than RS and can be used for coarse materials with more amounts of fine aggregates.
Emulsion MS is used for plant or road mixes with coarse aggregates minimum 80 percent, all of which is retained on 2.36 mm. Our bitumen is processed using sophisticated technology and quality tested chemical compound in conformity with the predefined industry standards. This bitumen can be availed in various colors and can be customized as per information provided by our clients.